|Place of Origin:||China|
|Certification:||CE / FDA|
|Model Number:||Three layers|
|Minimum Order Quantity:||10000 pieces|
|Packaging Details:||Standard Packing|
|Delivery Time:||Within a week|
|Supply Ability:||50000 a day|
|Filter Rating::||>=95%, 98%||Stock:||Yes|
|Material::||Wool / Polyester||Shelf Life::||2 Years, 2 Years|
|Disinfecting Type:||Far Infrared||Applicable People::||All The Crowd|
95% Protective Earloop Disposable Masks,
Nonwoven Fabric Breathable Medical Face Mask,
FDA Breathable Medical Face Mask
Breathable 95% Protective Nonwoven Fabric Earloop Surgical Mask
The three-layer filter and the filter layer are made of two layers of non-woven paper; the spinning circle is made of professional sanitary and medical fiber non-woven fabrics with two layers, and the middle layer is added to prevent more than 99% of the bacteria. After being absorbed and introduced, the environment-friendly full plastic strip at the bridge of the nose does not contain any metal, is breathable and comfortable. The filtering effect is as high as 99%, which is especially suitable for electronic factories; for outdoor parties, 28 grams of non-woven fabric is used on the surface and the first layer of intermediate paper is filtered with bacteria to prevent bacteria from filtering up to 99% to prevent viruses and prevent virus damage; in the middle; The second layer is the use of new high-efficiency, filter materials-with new type of carbon fiber, carbon cloth sports function, with anti-virus, anti-odor, filter bacteria, dust and other functions;
The nose clip can be folded at will to improve the fit of the face mask
Wide flat ear design,soft and free to adjust
nonwoven +BFE>95 melting spray,with strong air permeability and free breathing
Conditions of Use
There are various types of disposable dust masks, and the selection must be based on different job requirements and working conditions.
The first choice should be based on the concentration and toxicity of the dust. According to GB/T18664 "Selection, Use and Maintenance of Respiratory Protective Equipment", as a half-face mask, all dust respirators are suitable for environments where the concentration of harmful substances does not exceed 10 times the occupational exposure limit, otherwise a full face mask or protection level should be used Higher respirator.
If the particulate matter is highly toxic, carcinogenic and radioactive, the filter material with the highest filtering efficiency should be selected.
If the particulate matter is oily, be sure to select a suitable filter material.
If the particulate matter is needle-like fibers, such as slag wool, asbestos, glass fiber, etc., dust masks cannot be washed with water, and masks with microfibers attached to the sealing parts of the face can easily cause facial irritation and are not suitable for use.
For high temperature and high humidity environments, it will be more comfortable to choose a mask with an exhalation valve. Choosing a mask that can remove ozone for welding can provide additional protection. However, if the ozone concentration is higher than 10 times the occupational health standard, the mask can be replaced with dust, Poison combination filter element. For environments where there is no particulate matter but only some peculiar smells, it is much lighter to choose a dust mask with an activated carbon layer than to wear a gas mask, such as some laboratory environments, but due to national standards, the technical performance of such masks is not regulated.
Contact Person: Shi